SUMMARY: Items Ordered = 0, Value = AU$0.00



 * SMP+ provides the highest level of protection available
 * LiFT significantly reduces AC line noise
 * E.V.S. protects equipment from dangerous overvoltage conditions
 * Zero ground contamination circuitry assures delivery of pure AC
 * Two retractable, long-life, low-heat LED lights with dimmer for rack illumination
 * Front panel digital LED meter displays incoming AC line voltage (±1.5 VAC)
 * BNC connector on the rear panel allows connection of any standard gooseneck lamp
 * Eight rear panel outlets and one front panel outlet
 * 16 amp rating, with high inrush capable magnetic circuit breaker
 * Front panel master power switch protected by hinged panel to prevent accidental power off
 * 10 foot, 12 gauge heavy-duty power cable
 * Three year limited warranty


The most widely recognized and trusted name in AC power conditioning is proud to introduce the PL-PRO D E II power conditioner featuring Furman’s revolutionary SMP+ technology. Furman’s Series Multi-Stage Protection Plus (SMP+) circuit features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together; these technologies comprise what is, without question, the world’s most advanced and comprehensive transient voltage surge suppressor.

SMP+ (Series Multi-Stage Protection Plus)

Furman’s SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With Furman’s SMP+, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.

Unique to Furman’s SMP+ is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDA’s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman’s SMP+ clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP+ technology.

LiFT (Linear Filtering Technology)

Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman’s SMP+ with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

E.V.S. (Extreme Voltage Shutdown)

Furman’s trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.

Rear Panel BNC Connector

For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately).

Retractable LED Lights

Furman’s signature pull-out LED light tubes provide long lasting, low heat, discrete illumination for your equipment rack. A front panel dimmer knob allows you to control the brightness of the lights.

Front Panel LED Voltmeter

A digital LED voltmeter displays incoming AC line voltage with laboratory accuracy (±1.5 VAC).


Current rating: 16 amps
Operating Voltage: 180 to 280 VAC
Over Voltage Shutdown: 280 VAC typically
Voltmeter Accuracy: ±1.5 VAC
Spike Protection Modes: Line to neutral, zero ground leakage
Spike Clamping Voltage 376 VAC peak @ 3,000 Amps, 266 VAC RMS
(tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time: 1 nanosecond
Maximum surge current: 6,500 amps
Noise attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance
Dimensions: 44.45mm H x 482.6mm W x 266.7mm D.
Weight: 5 kg.
Construction: Steel chassis, 3.175mm brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption: 12 watts
Safety Agency Listings: CE, NRTL-C

-more info-   -make inquiry-   -tell a friend

click here



Price:  $792.00   (includes GST)



Currency Converter

Policies, Terms & Conditions